|
If you want a NO COST modest performance upgrade for your GB3D
(Laguna) card, here's how to do it! This process involves changing information in your
system registry! By performaning this procedure you will be Clocking your video card
BEYOND the Board Manufacturers recommendations! - Do this at your own risk!
OK, now that's out of the way the stops involved are as follows:
1) From the START button select run and type in "REGEDIT"
2) Use the Search function and search for the word "LAGUNA"
REGEDIT will find entry for CIRRUS LOGIC, with a sub-entry called Laguna. Under Laguna is
an entry for PERFORMANCE.
3) Performance will contain keys for: ClockSpeed (Default is 16, below the recommended
max) Min (Default is 16). Max (Default is 18). Exotic (Default is 0).
4) Change the Max setting to 20! (This allow tweaking of ClockSpeed
5) Change ClockSpeed to 18, or 19!
Numbers above 19 created artifacts on my Hi-Res/Color Screens.
**** DO NOT SET ABOVE 22! ****
**** Blank Screen will Result, you'll need to BOOT SAFE to Change it
Back ****
6) Change Exotic to 1 (I think this helped)
Thats it
| DISCLAIMER: Using the overclocking utilities enables you to use the product at
speeds beyond the manufacturers default. This may void warranty and can cause damage to
the hardware. Use them carefully and don't go to far. Also for the overclocking
which requires editing the Windows registry file, be sure to always make a backup first.
Everything you do is at your own risk, and I cannot be held responsible for any damage or
malfunctioning that may occur. |
|
