Computers R us

MAIN
Latest News
News Archive
Overclocking
Downloads
Advertising
Links
Contact Info
Message Board

HARDWARE
Reviews
Articles
Specs

SOFTWARE
Reviews
Previews
Articles
Tips and Tricks
Cheats

You can put the following in your AUTOEXEC.BAT or in WinNT:s system
variables (through the control panel):

SET SSTV2_GRXCLK=90 (this is the standard setting running the card at 90Mhz)

Now change it to a higher number by changing the line in the AUTOEXEC.BAT to this:

SET SSTV2_GRXCLK=100

You'll need to reboot your computer for the variable change to take effect.

The improvement that you gain through this is minimal (+0.1 fps). So it is really
pointless to overclock the Voodoo².

You can also use the above line in your AUTOEXEC.BAT or pull up the windows registry
(Run / regedit) and locate the registry setting for your Voodoo² board under
HKEY_LOCAL_MACHINE / Software / 3Dfx Interactive / Voodoo 2 and insert a new entry
named SSTV2_GRXCLK under both the GLIDE and Direct3D subdirs found here, set it's
value to 100 in decimal and you're good to go.

DISCLAIMER: Using the overclocking utilities enables you to use the product at speeds beyond the manufacturers default. This may void warranty and can cause damage to the hardware. Use them carefully and don't go to far. Also for the overclocking which requires editing the Windows registry file, be sure to always make a backup first. Everything you do is at your own risk, and I cannot be held responsible for any damage or malfunctioning that may occur.

LinkExchange Member

Back to top