| I guess everybody knows it by now, but for
those who don't here's how to tweak your 3Dfx Voodoo Graphics card:
You can put the following lines in your autoexec.bat to get
better performance.
- SET SST_GRXCLK=XX (where XX is the speed, default is 50,
don't go beyond 58 without cooling)
XX is the speed of the chipset in MHz, with the Monster 3D
"max performance" setting the speed is set to 57 MHz, so that could be considerd
safe for most cards... Other settings which might help are:
- SET SST_FASTMEM=1
- SET SST_FASTPCIRD=1
- SET SST_PCIRD=1
- SET SST_VIDEO_24BPP=1
- SET FX_GLIDE_SWAPINTERVAL=0
- SET SST_SCREENREFRESH=60
- SET SST_SWAP_EN_WAIT_ON_VSYNC=0 (this can cause image
tearing)
| DISCLAIMER: Using the overclocking utilities enables you to use the product at
speeds beyond the manufacturers default. This may void warranty and can cause damage to
the hardware. Use them carefully and don't go to far. Also for the overclocking
which requires editing the Windows registry file, be sure to always make a backup first.
Everything you do is at your own risk, and I cannot be held responsible for any damage or
malfunctioning that may occur. |
|
