| AX6L's
Specification |
| Board Size, Form Factor |
305 mm x 244 mm, ATX Size |
| CPU |
Intel Pentium II 233/266/300MHz (Klamath) Processor, Slot 1 |
| System Memory |
3V EDO or SDRAM, 168pin DIMM x4, Max. 1GB |
| Second-level Cache |
On the CPU Card (Slot 1 Connector) |
| Chipset |
Intel 82440LX PCIset |
| Expansion Slots |
ISA x 3, PCI x 4 and AGP x 1 |
| Serial Port |
2 serial ports. (UART 16C550 compatible) |
| Parallel Port |
1 parallel port. (SPP/ECP/EPP supported) |
| Floppy Interface |
1 Floppy Drive Connector (1.2/1.44/2.88 MB for 3.5 inches FDD) (
360KB/1.2MB for 5 inches FDD) |
| IDE Interface |
Dual-Channel IDE interface. (Support to maximum 4 IDE hard disks,
CDROM, Mode 4, Bus Master and Ultra DMA/33 supported.) |
| USB Interface |
Dual-Channel USB (Universal Serial Bus) Ports onboard. BIOS also
supports USB driver to simulate legacy keyboard. |
| PS/2 Mouse |
Mini-Din PS/2 mouse connector onboard. |
| Keyboard |
Mini-Din PS/2 keyboard connector onboard. |
| RTC and Battery |
Built-in with Intel PIIX4 chipset, Lithium Battery (CR-2032) is an
option, no battery is needed if the power core is plugged. |
| BIOS |
AWARD Plug-and-Play 2M bit Flash ROM BIOS |
| Suspend to Hard Drive |
Supported by BIOS, save your work to hard disk and resume within a very
short time. VESA compatible VGA and Sound Blaster compatible sound card required. |
| Modem Wake UP |
Special circuit (Patent Applied) to support modem ring up by external
modem or internal AOpen MP56 modem card |
| RTC Wake UP timer |
Program the date/time to wake up your system |
| Synchronous Switching Regular |
High efficient synchronous switching regulator. |
| Over-current Protection |
Full line (5V/12V/3.3V and CPU) over-current protection. |
| CPU Thermal Protection |
Warning when CPU temperature is overheat. Option for OEM to have sensor
at CPU heatsink. |
| FAN Monitoring |
Two Fan connectors, warning when CPU or housing fan is malfunction. |
| System Voltage Monitoring |
Warning when system voltage(5V/12V/3.3V and CPU) are abnormal. |
